Related to Reducing Biomanufacturing Bottlenecks

• 
• Fermentor/Bioreactor
• Sartorius Stedim Biotech
• Biostat® B is an autoclavable fermentor/bioreactor designed to cover a range of requirements in biotechnological and biopharmaceutical research and development. Its control unit is available as a single or twin version and can control up to tw
• 
• Bioprocess Monitoring System
• Stratophase
• The Ranger™ system can be integrated into all bioprocessing systems running microbial or mammalian cell cultures, and enables bioprocess managers to monitor and control metabolic rate, observe batch processing trends, and determine end of process.
• 
• Hybrid Connector
• Colder Products
• The AseptiQuik® STC for use in biopharmaceutical processes uses a hybrid combination of stainless equipment and single-use systems. The combined AseptiQuik sterile connector and Steam-Thru® II SIP connector can give biopharmaceutical manu
• 
• Bioprocess Performance Troubleshooting
• Spinnovation Biologics
• Spedia-Predict™ monitors and validates process-critical parameters to help manage the culture media consistency used in a production environment and can help to prevent failure and performance variability in large-scale commercial production. Spedi
• 
• Bioreactor
• Infors HT
• The Terrafors-IS bioreactor works well for in situ sterilizable, laboratory-scale fermentation of solids and semi-solids. It provides aseptic conditions through automatic steam sterilization of a rotating drum. Maximal working volumes include 3–4 k
• 
• Sterile Sampling Bottles
• EMD Millipore
• The NovaSeptum® 125, 250, and 500 mL bottles are designed for sterile sampling from biomanufacturing processes. The bottles feature a single-piece cap with an O-ring component for container closure. This design can protect product integrity an
• 
• Bioreactors
• Sarstedt
• miniPERM® bioreactors feature two compartments separated by a dialysis membrane for production of concentrated cell products of several mg/mL and biomass of more than 10 7 cells/mL in small volumes. A nutrient module with membrane-vented cap s
• 
• Peristaltic Pumps
• Watson-Marlow Pumps Group
• Profibus-enabled peristaltic pumps are designed for process monitoring in validated cGMP production. The Bp pump brings Profibus networking to peristaltic pumping; customers can integrate this seal-less, valve-less pump technology into their Profib
• 
• Pressure Gauge
• Ashcroft
• The DG25 digital pressure gauge provides a 5 full-digit LCD in ranges up to 25,000 psi. Available in accuracies of 0.5% and 0.25% FS, this design boasts a minimum battery life of 2,000 hours. Standard features include an IP67 enclosure, selectable
• 
• Polyethylene Bottom-Entry Mixer
• Terracon
• A new bottom-entry nonmetallic mixing tank is now available and is being offered in capacities up to 1,000 liters. All models include a cylindrical, cone-bottom molded polyethylene tank for ease of cleaning and complete drainage, as well as a magne
• 
• Self-Cleaning Benchtop Bioreactor
• Infors HT
• Labfors 5 with LabCIP is a self-cleaning and self-sterilizing benchtop bioreactor. The LabCIP feature cleans and sterilizes the benchtop bioreactor automatically (e.g., overnight). This can reduce the downtime of the bioreactor and increase the tim
• 
• Microcarriers for Bioprocess Scale-Up
• Corning B.V. Life Sciences
• A new line of microcarriers for large-scale vaccine and cell therapy manufacturing is now available. The microcarriers can simplify the scale-up of attachment-dependent cells by providing a premeasured, sterile, ready-to-use product for direct tran
• 
• Bioprocess Capsules
• Pall Life Sciences
• SUPRAcap™ 50 capsules are designed to help you choose the right process-volume depth filter media. They are scalable to SUPRAcap 100 capsules or SUPRAdisc™ I/SUPRAdisc II depth filter modules and are also available with Seitz® HP sheet media (
• 
• Saccharification and Fermentation Bioreactor
• Infors HT
• The Labfors 5 BioEtOH bioreactor was designed for research and development in the lignocellulosic ethanol production sector. The production of ethanol from lignocellulose-containing raw material is a two-phase process. The Labfors 5 BioEtOH combine
• 
• Membrane Filter Cartridges
• Pall Life Sciences
• Supor® EX grade ECV filters are high-capacity, high-flow rate sterilizing-grade filters designed for filtration of a range of liquids in bioprocessing. They feature an asymmetric polyethersulfone (PES) membrane layer that makes them good for f
• 
• Virus Removal
• Asahi Kasei Bioprocess
• Designed for pilot-, clinical-, and commercial-scale manufacturing of biopharmaceuticals, the Planova™ Virus Filtration Controller can perform consistent virus removal using Planova and Planova BioEX filters. Customary virus filtration operations c
• 
• Single-Use Bioreactor
• Pall Life Sciences
• The XRS 20 bioreactor system is a bioreactor with agitation properties that incorporates a single-use Allegro™ 3D biocontainer. This “rocker” bioreactor, designed for the cultivation of mammalian cells in suspension culture, is suitable for applica
• 
• Single-Use Mini Bioreactor
• Eppendorf
• The BioBLU 0.3f is designed for the cultivation of animal and human cells. Both the BioBLU 0.3c and BioBLU 0.3f are specifically designed for use with the compact DASbox® mini-bioreactor system. The DASbox system is a system for parallel opera
• 
• Single-Use TFF System
• Pall Life Sciences
• The Allegro™ single-use tangential flow filtration system is fully automated for control and monitoring of critical process parameters. With a fully disposable flow path, the system can help reduce cleaning, downtime, validation, and the risk of cr
• 
• Automated Bioreactor System
• TAP Biosystems
• The ambr 250™ is an automated bioreactor system for parallel fermentation or cell culture, using single-use 250 mL bioreactors controlled by an automated workstation. The system, developed with two major industrial partners, features increased ferm