Leading the Way in Life Science Technologies

GEN Exclusives

More »

BioPerspectives

More »
October 21, 2015

Thought Leaders’ View: How Do I Analyze Biosimilars with Reversed-Phase Liquid Chromatography?

  • Q: What is reversed-phase LC?

    Answer: Reversed-phase LC is a powerful tool for characterizing mAbs and biosimilars. It is used with UV detectors in QC monitoring and product release testing, and with MS to characterize everything from an intact antibody down to peptide fragments in a digested antibody.

  • Q: Why use reversed-phase LC to analyze biosimilars?

    Click Image To Enlarge +
    Figure 1. Four examples of reversed-phase LC analysis used to characterize mAbs and biosimilars.

    Answer: Reversed-phase columns with smaller particle sizes and superficially porous particles provide extra resolution and save time when characterizing mAbs and biosimilars.Figure 1 shows four examples of RP separations of intact, heavy chain (Hc)/light chain (Lc), fragment antigen-binding (Fab/Fc), and tryptic peptides of Herceptin. LC and LC/MS were used together with UHPLC columns, packed with sub 2 µm fully porous particles, or HPLC columns packed with 2.7 µm superficially porous particles. The goal in all these separations was to determine identity and purity, so that innovator and biosimilar therapeutics could be characterized and compared in the shortest possible time. Note that intact mAb, Fab/Fc, and Lc/Hc can all be separated using exactly the same chromatographic method.

  • Q: What about using reversed-phase LC for examination of intact mAbs?

    Click Image To Enlarge +
    Figure 2. Reversed-phase LC gradient separation of intact Herceptin originator and a biosimilar on an Agilent ZORBAX RRHD 300SB-C8, 2.1 x 100 mm, 1.8 µm column.

    Answer: When it comes to separating an intact mAb with a typical RP gradient, minor changes in the organic solvent substantially affect the separation. We need a shallow gradient (low % B change/min) over a narrow total organic range. Figure 2 shows an example of the separations of a Herceptin originator and biosimilar. The biosimilar was purified on the Agilent Bio-Monolith Protein A column as shown in last month’s article. Several peaks are identifiable in the UV chromatogram due to the high resolution provided by the Agilent ZORBAX RRHD 300SB-C8, 1.8 µm column fitted to an Agilent 1290 Infinity LC.

  • Q: Can reversed-phase LC help me understand minor modifications?

    Click Image To Enlarge +
    Figure 3. Reversed-phase LC separation of tryptic peptides of Herceptin and a biosimilar on an Agilent AdvanceBio Peptide mapping column, 2.1 x 100 mm, 2.7 µm column.

    Answer: Yes, it can. More information becomes available when separating fragments of mAbs including Fab/Fc, Lc/Hc, and peptides. Figure 3 shows the RPLC-UV separation of the tryptic peptides of Herceptin and a biosimilar on the Agilent AdvanceBio Peptide Mapping column fitted to an Agilent 1290 Infinity LC. Peptide mapping can provide an enormous amount of detail on the primary structure and post-translational modifications, allowing extensive characterization and comparison between an originator and biosimilar. While the peptide maps shown in Figure 3 are highly comparable, differences in glycosylation are revealed. The different glycosylated variants were nicely resolved chromatographically and observed by UV detection. Undergalactosylation of the biosimilar became apparent. Several other impurities identified from the peptide mapping data included lysine truncation, methionine oxidation, and asparagine deamidation. All of these modifications were minor and in low quantities, but could be critical to potency and safety of a mAb.

    These examples of reversed phase LC of Herceptin and a biosimilar are key separations for characterizing and comparing mAbs. In the next issue of Access Agilent, we will look at charge variant and aggregate analysis, wrapping up the series with an article on the powerful software tools you can use to speed up your analyses. All the articles are freely available in detail in Prepping Biosimilars.

  • Biopharma and LC Solutions

    High resolution, optimized gradient LC methods with sub-2 µm and superficially porous columns, combined with UV and accurate mass Q-TOF, provide the insights you need for your biosimilars. These advanced methods help you correctly determine molecular weight and identity, confirm purity, and find difficult to resolve impurities. Learn more about Agilent biopharma solutions and reversed-phase columns to boost your accuracy and productivity to help advance your biopharma research.

Related content